Hangar rates
What a tick costs on Broadway
Prices are for the capture and the paper. Tubes, grips, and epoxy are extra and quoted on the sheet before we mix anything. We do not run coupons or “member flex packages.”
| Work order | What gets clamped | Clock | USD |
|---|---|---|---|
| Neighbor Match | Iron stair, typically 4–PW (up to 8 clubs) | ~70 min | 185 |
| Wedge Stair | Two or three wedges on their own sheet | ~25 min | 75 |
| Neighbor + Wedges | Iron stair and wedge stair in one visit | ~95 min | 240 |
| Single-club re-tick | One iron or wedge already on file this calendar year | ~15 min | 40 |
| Winter dry-air recert | Re-run a prior iron stair, humidity noted against the original | ~50 min | 120 |
| Wood pair | Driver plus one fairway, or two fairways | ~30 min | 90 |
| Hybrid add-on | One hybrid during an iron visit | ~10 min | 35 |
| Putter fixture | Baseline hoop after a reshaft | ~15 min | 45 |
| Reshaft labor | Pull, prep, epoxy, sit — tube sold separately | ~60 min + cure | 55 / club |
Cash or card. Work orders over $300 can be split. Gift work orders are on the gift page.
What is not in the number
Tubes, freight, and other people’s shops
If a neighbor is out of tolerance and you want a new tube, we will quote the blank and the labor before the heat gun comes out. We do not keep a warehouse of every OEM shaft. Some blanks have to ride in from a distributor; that wait is yours to accept or decline.
A loft-and-lie machine is not in this suite. If the stair is fine and the face is pointing at Kansas, that is a different work cell. We will tell you honestly when the problem is not frequency.